Welcome To Steve's Music Center !

Empress Effects ParaEQ with boost

Empress Effects

Sold out.

Empress Effects ParaEQ with boost Are you someone that’s always striving to enhance your tone? It’s time to un-leash the power of the Empress ParaEQ w/Boost EQ Pedal on your instrument – sadly, it may piss you off that you haven’t been using it for years.

  • Ultra Transparent Sweet Sounding EQ – enhance your sound without masking the tone of your instrument.
  • Lots of Control - with switchable q, fully over-lapping sweepable frequency selection, and 15dB of cut and boost you’ll get all the control you need.
  • Ultra-Quiet – You’ve come to expect our pedals to be noise free and we’ve delivered once again. If you put this at the front of your chain and boost a bit you’ll also cut down on the noise your other pedals are introducing.
  • Loads of Headroom - Internally switchable to run off 9/12/18V power supplies.
  • 30dB of Boost - making it an ideal candidate before long effects chains and overdriving tube amps.
  • Pristine Clean Sound – We measured the distortion to be less than 0.03%. Pretty remarkable for a guitar pedal.
  • True Bypass - The Empress ParaEq w/Boost EQ Pedal employs true bypass, so you can be sure that it's not affecting the signal when disengaged.
  • Perfect Size - The enclosure measures approximately 4.5" by 3.5" by 1.5", which is delightfully small when considering all the features packed into this unit.
  • 45 Day Money Back Guarantee - If for any reason the ParaEq w/Boost isn't for you, send it back within 45 days for a refund. Read our Guarantee for more details. This guarantee does not cover Empress products not bought from www.empresseffects.com.
  • Two Year Warranty - The Empress ParaEq w/Boost EQ Pedal comes with a two-year warranty. Read our Warranty for details. You can extend the warranty to 4 years by simply registering online.
  • Great Value - The Empress ParaEq w/Boost, a perfect blend of quality and innovation.
  • The Empress ParaEq w/Boost does not run off of batteries. It is powered by a standard 9, 12 or 18VDC negative tip wall wart (like the BOSS PSA-120). Power supply sold seperately.


power supply compatibility chart

 

Power Input Voltage 9 - 24 V DC (Negative tip)
Power Input Connector 2.1mm barrel connector (Negative tip)
Power Consumption ~75mA at 9V
Enclosure Material Die Cast Aluminum
Input connector 1/4" Jack
Output connector 1/4" Jack
Height (Enclosure only) 1.5"
Height (including controls) 2"
Length 3.5"
Width 4.5"
weight 1 lb
Q's 0.5, 1.5 and 3
input impedance 500K ohms
output impedance 510 ohms