Welcome To Steve's Music Center !

Boomerang III Phrase Sampler

Boomerang

Sold out.

 Boomerang III Phrase Sampler
*Features*

•  Easily syncs to an external MIDI clock source.
•  Flexibility provided by 4 distinct Play Styles.
     Serial Play Style - loops play one after the other for building a song in verse/chorus/bridge fashion.
     Serial Master Play Style - For serial style loopers it's nice to have a rhythmic background behind the melodic loops. Mute 
        the strings and record a short "chika-chika" or beat on the sides of your acoustic axe. This rhythmic master loop can 
        then play along with any other loop.
     Sync Play Style - all loops can play simultaneously and are synced so they stay together.
     Free Play Style - all loops can play simultaneously and are NOT synced; this is great for creating ambient soundscapes.

•  3 or 4 loops - your choice.
•  Stacking - "stacking" is adding a part to a loop (There is no limit to the number of parts you can stack.)
•  Undo/Redo - the last part stacked can be muted, then played again or rerecorded.
•  Erase - loops can be erased one at a time or all at once; some loops can be erased while others plays.
•  Copy Loop - a complete loop can be copied whether it is playing or not.
•  Copy Live - this enables "re-sampling" and is very powerful; the pedal's output is routed to a new loop.
•  Octave - loop plays at half speed and an octave lower.
•  Reverse - loop plays backwards.
•  Once - loop plays one time through then stops or if already playing, it stops at its end.
•  Stutter - enables repeatedly starting a loop over before it plays all the way through, sort of like record scratching.
•  Fade - loop(s) fades in or out with one button press; fade time can be 3 to 43 seconds.
•  Reverse Solo - this is a built-in effect and enables you to create reverse leads live.
•  Two Sample Rates - 48KHz or 24KHz, both use 20 bit samples; through signal is always 48KHz / 24 bits.
•  Thru Mute Function - turns off through signal.
•  Expression Pedal Jack - connect an expression pedal for foot control of overall playback volume or Decay Rate.
•  Volume Knobs
     Serial & Serial-Sync Play Styles
        Volume controls playback level
     Sync & Free Play Styles
        Volume controls playback level of loop 1
        Vol 2 controls playback level of loop 2
        Vol 3 controls playback level of loop 3
        Vol 4 controls playback level of loop 4
•  Decay Rate Knob - sets the rate at which earlier parts fade when new ones are added; continuously variable from 0-100%.
•  Stereo or Mono - recording and playback will be stereo or mono depending on which of the Smart Jacks you use.
•  Smart Jacks - the RangTM III senses which jacks are being used and provides different signal routing options.
•  Rugged 9" x 6" x 2" steel chassis.

*Software Version History *
Version 1.0 - 2009, Aug
    This is the initial release that supported all the Bonus button functions but had only Serial and Serial-Sync Play Styles.
Version 2.0 - 2010, Sep
    Our original concept of the III was completed with the addition of Sync and Free Play Styles.
Version 2.1 - 2011, Jul
    Support for the Side CarTM controller and the ability to control Decay Rate with an expression pedal were added.
Version 2.2 - 2012, Jun
    Just a bug fix. Only one player came across this particular cockroach, but it was significant enough that we spent time squashing it.
Version 3.0 - 2012, Dec
    This release enables the III to sync to an external MIDI clock. The MIDI Start and Stop commands are also supported.

How to determine which software has possessed your III

    Deciding between software Version 1.0 and newer releases

        Power up your III. If the Serial Play Style light is on bright, it has Version 1. If any 2 Play Style lights are on dim, it 
        has one of these Versions: 2.0, 2.1, 2.2 or 3.0.

    Determining exact software version

        To verify which software version has possessed your III, hold down the loop 1 button and yellow Bonus button 
        through the entire power up sequence (about 10 seconds). You'll end up with the clock's center light on and no others.
        Release the buttons.

        Press B1 to see the first digit of the software version; the clock display shows you. Release and press B2 for the
        second digit. B3 shows the third digit. You should get something like: 050 or 104.
        050       = Version 1.0
        103-104 = Version 2.0
        111       = Version 2.1
        114       = Version 2.2
        118       = Version 3.0
        
How to receive new software

    All software is free to RangTM III owners. Email us and we'll gladly send a file with downloading instructions. Please do not
    try to download software to your III if it has doesn't require it.