Adjustable Shimmer effect
5 Shimmer effects, can achieve +3,+4,+5,+7,+9 half-step modulation. And the OCTAVE button can add another octave on those 5 Shimmer effects. Shimmer effect can be activated by a separated foot switch. The volume of the Shimmer effect could be adjusted by press down and hold the Shimmer footswitch and dial the Dry knob.
DRY and WET Knob
DRY knob controls the volume of the guitar sound and the WET knob controls the volume of the reverb effect.
HI CUT and LOW CUT Knob
These two knobs control the high and low frequency of the reverb effect.
Trail ON/OFF function
Trail ON is the Buffer Bypass mode in which the reverb effect will be held even if you turn off the reverb effect.
Trail Off is the True Bypass mode in which the reverb effect will be immediately stopped when you turn off the reverb effect.
To save your tone, simply press down two footswitches together and hold for 3 seconds or longer. To use your saved tone, simply press down two footswitches together again.
|Dry Knob||volume of dry signal|
|Low Cut Knob||low freq of reverb sound|
|Hi Cut Knob||high freq of reverb sound|
|Pre Delay Knob||delay time for reverb|
|Decay Knob||decay time for reverb|
|Wet Knob||effect level of reverb|
|Reverb type||select type of reverb|
|Octave Switch||adds octave up in shimmer effect|
|Trail ON/OFF||cuts decay / natural decay|
|Reverb||On / Off Reverb|
|Shimmer||On / Off Reverb|
|Power||AC adapter 9V DC (center minus plug)|
|Dimensions||(HxWxD) 106 x 96 x 53mm|
|Model||Mooer Audio ShimVerb Pro|