Koko Boost is a unique boost pedal that incorporates both a clean transparent boost and a selectable midrange boost. Koko will expand the range of your tube amplifier and Overdrive / Distortion pedals.
Koko Boost features an easy to tweak layout which includes Boost and Mid knobs, plus a Freq (Frequency) select switch. The two foot-switches allow instant access of each boost mode.
Boost: Adjusts the overall output of the boost circuit. The Boost control varies from 0dB (unity gain) to +20dB of gain. Tuning this control to higher settings will efficiently push the front-end of your amplifier and create a broad range of natural overdriven tones.
Mid: Adjusts the output of the selected Mid frequency (via the Freq switch) that is added to the clean boosted signal.
Freq Switch (Three Position):
The FX Link can be utilized to remotely control the pedal. Shorting between the shield and the tip will activate the pedal. Opening the connection will turn off the pedal.
The internal 9V battery is monitored at both power up and during use. The user will be alerted when the battery voltage becomes low. When the battery becomes too low to reliably operate the pedal, True Bypass is activated.
Input Impedance: 1M ohm
Output Impedance: 600 ohm
Power Connector: 9Vdc, center negative, 2.1mm x 5.5mm
Operating Voltage: 4V to 18V (nominal 9V)
Maximum Voltage: 20Vdc
Reverse Battery Protection: yes
Over Voltage Protection: yes
Current Consumption: 8mA
Estimated Battery Life: 75 – 100 hours continuous use
Dimensions: 4.875” Width x 3.875” Depth x 1.375” Height
Weight: One pound
FX Link Connector: 1/8” stereo
FX Link max Voltage: 3.3Vdc
Shield → Tip: Activate Mid Boost
Shield → Ring: Activate Boost
ROHS Compliant: Yes
Agency Approvals: N/A