Flattley The Ace Tone Boost FGP-SR-TACE

“The Ace” is a clean boost/buffer with the twist of having the Flattley “Solaris Pro” tone stack allowing it to be used as a clean boost (tone at middle), a treble boost (tone clockwise) or bass boost (tone anti-clockwise) and all stops in between.
It can be used at the front end of a signal chain to push distortion pedals harder and also pre emphasise the frequencies to be distorted.
Placed in mid signal chain, it can help pedals that are a bit dull and quiet, such as vintage pedals by locally boosting gain and tone which in turn brings them to life.
Put last in the signal chain, the pedal can increase the volume of a chain of pedals, enhancing the tone by increasing the presence of a lead tone by lifting the whole sound whilst soloing.
At the mid tone setting, the pedal does give a slight lift in tone that will make most single coil guitar owners smile, push it really hard with another pedal and it will give a soft clip in a pleasant way. It will also help a passive bass guitar sound beefier, give great late night jazz tones on humbucker guitars with the tone fully anticlockwise, nice funky single coil sounds with the tone setting just past middle.
The blue halo light ring installed diffuses the light when playing live, avoiding being blinded by the standard LEDs just as you are about to go into that all important solo thus giving a larger area to see where the pedal is located easily on the pedal board on darkened stages. The addition of the large aluminium foot topper gives you more real estate for contact when switching the pedal on and off during quick changes when playing live.

All Flattley “Silver Range” pedals are hand processed in our Flattley paint shop. They are etch primed first to ensure that the primer bonds to the aluminium enclosure which also provides an anti-corrosive protection layer. Multiple coats of base coat primer applied, the silver base coat colour is then applied and topped off with several coats of lacquer. Once the lacquer is hardened, it is then hand polished to achieve the smooth deep lustre finish that is inherent in all Flattley Guitar and Bass effects pedals. The graphics designed in house by our graphics designer Phoebe Flattley are applied to “Silver Range” effects pedals by UV direct printing in our printing shop.