Welcome To Steve's Music Center !

Skreddy Pedals Skreddy Lunar Module Mini Deluxe

Skreddy Pedals

Sold out.

Skreddy Pedals Skreddy Lunar Module Mini Deluxe SKR-LMMD

Aggressive silicon fuzz with huge range including clean, overdrive, and distortion

The Skreddy Pedals™ Lunar Module was designed for "that" certain silicon fuzz tone guitar solo I fell in love with on a best-selling 1973 album.

(okay, it's the "Time" solo)
I intentionally voiced this thing aggressive so it will cut through any mix.  Very satisfying and addictive "vintage" fuzz tone.

Unlike typical silicon fuzzes, which can sound thin and raspy, the Lunar Module has a fat sound and can be darkened to taste.

Old-School Fuzz in a New, Modern Design

  • Great classic silicon fuzz tones but with control and tweakability
  • Gets along with other effects
  • Reliable and consistent--not touchy or temperamental
  • Huge range, from tight, aggressive overdrive/distortion to sustaining, ultra-saturated fuzz
  • Of course true bypass, LED, DC power
  • Controls:

    Volume
    Sets the output volume. You can adjust your Skreddy Pedal to roughly the same volume as your bypass signal (i.e.; “unity gain”) or you can boost your signal for a fatter tone.
    Fuzz
    Takes you from gritty, touch-sensitive overdrive all the way to liquid, infinite-sustaining fuzz. Warning: it can get noisy at high settings.
    Body
    Dials in the amount of bass going into the fuzz section, for everything from tight overdrive to full-voiced distortion to thick, nasty fuzz. Warning: it can get noisy at low settings.
    Brite
    You can get more brilliance and “hair” or make it darker and smoother, to suit your amp and taste.
    Range
    Sets the gain of the input transistor. Turned all the way up, the Lunar Module will be fuzzier and more aggressive, but also noisier. Turned lower, there will be a darker, tamer response. I tend to like it about 20% backed off from max.

    Power

    9v battery is not included. If you use a battery, then remember to un-plug the input cable from the pedal’s input jack when not in use to prevent draining (or you can also just plug in a power-supply, which disconnects the battery). You may supply external power through an AC adapter. All Skreddy Pedals accept the industry-standard 9v DC plug (5.5mm barrel x 2.1mm center coax), negative tip. Please use a quality, regulated, filtered power supply.